51.2V 100ah 200ah 5kwh 10kwh Grade a Cell Rechargeable Lithium Ion Li-ion Energy Storage 48V Solar Power Battery

• Customization: Available
• Nominal Voltage: 48V(51.2V)
• Warranty: 10 Years
• Model NO.: HYLV-100-B
• Nominal Capacity: 5.12kwh
• Cycle Life: 6000 Cycles
• Certification: IEC,CE,Un38.3,MSDS
• IP Class: IP21
• HS: 8507600090
• Weight: 40kg
• Rated Capacity: 100ah
• Depth of Discharge: 90%
• Max.Charge/Discharge Current: 100ah
• Operating Temperature: Charge: 0-50ºC; Discharge: -10-50ºC
• Storage Temperature: -20-55ºC
• Communication: RS485 / Can / RS223
• Transport Package: Carton/Wooden
• Specification: 482.6*500*132 (per module)
• Trademark: HUAYOU ENERGY
• Origin: China
• HS Code: 8507600090
• Production Capacity: 50000pieces/Year

Product Description

Product Parameters

Battery Module:  HYLV-100-B
SPECIFICATIONS
Nominal Capacity(kWh)		5.12	10.24	15.36	20.48	25.6	30.72
number of modules		1	2	3	4	5	6
Dimension (W*D*H mm)		482.6*500*132 (per module)
Net Weight (kg)		42±2kg( per module)
General
Battery Type		LiFePO4  Cell
Nominal Voltage(V)		51.2
Operating Voltage(V)		44.8-58.4
Nominal Capacity(Ah)		100
Depth of Discharge		95%
Max.Charge/Discharge Current(A)		100
Peak Discharge Current(A)		200A@30s
Operating Temperature		Charge: 0-50ºC Discharge: -10-50ºC
Storage Temperature (recommend)		-20-55ºC (15ºC~35ºC)
Communication		RS485/CAN/RS223
Humidity		10%-85%(no condensing)
Altitude		Max.2000m
Cycle Life		≥6000,25ºC
Ingress protection		IP21
Warranty		5years /10 years(optional)
Certification
Safety(CB)		IEC 62619:2022
EMC(CE)		EN IEC61000-6-1:2019 EN IEC61000-6-1:2021
Transportation		UN38.3, MSDS

Product Description

 HYLV-100-B lithium iron phosphate battery is the new energy storage products developed and produced by HUAYOU. It can be used to support reliable power for various types of equipment and systems. HYLV-100-B has built-in BMS battery management system, which can manage and monitor cells information including voltage, current and temperature.

Features:

1. Wide temperature range: The product is designed to resist high and low temperature, and the lithium iron phosphate battery with high temperature resistance is used to ensure the normal operation of the system, which can adapt to the environment of -10ºC ~ +50ºC.
2. Quick-plug installation: The product is equipped with quick-plug standard interfaces, the interface protection level reaches IP50, and the insulation voltage is 1500V, making the installation fast, safe and efficient.
3. Multiple groups in parallel: Multiple groups of batteries are connected in parallel for higher power loads. It can effectively deal with the adverse effects of the circulation on the overall operation of the system in parallel, and ensure the safe and long-life operation of the lithium battery pack.
4. Online software upgrade: Remote maintenance or function optimization can be achieved through remote online software upgrade.
5. High stability: high stability of lithium iron phosphate battery system and intelligent BMS to ensure the stability of the battery.
6. Hibernation: When the battery is running under-voltage protection, the BMS automatically shuts down the power supply to minimize the battery power consumption and prevent deep discharge, ensuring battery safety.
7. Pre-charging: It has the pre-charging function and can adapt to the load condition when the input end has a large capacity capacitor. The maximum pre-charge flow is 1A and the maximum pre-charge time is 3s. This mode applies to the scenario where the device has no more than 20mF capacitor.
8. Back connection protection: When the output is back connected, the BMS detects that the output is back connected after it starts up, and immediately starts the back connection protection to prevent the reverse voltage from damaging the device.
9. Temperature thermal management: It has the function of collecting the temperature of the cell and the environment, and it also has the function of high and low temperature alarm and protection of the cell, and high temperature protection.
10. Intelligent balancing: The charging balancing policy can be flexibly configured to effectively improve battery life and cycle life.
11. Multiple protection functions: with battery level overcharge, over discharge, over-current, short circuit, high temperature, low temperature alarm and protection, electric core level overcharge, over discharge alarm and protection functions.
12. Communication function: supports CAN & RS485 communication interfaces to meet different application requirements of customers.
13. LED status indicator: multiple LED indicators can indicate SOC, running status and fault status.
14. Small size and light weight, standard of 19-inch embedded designed module is comfortable for installation and maintenance.

 Equipment interface instruction:

1.SOC: 4 green LEDS show the battery's current capacity.
2.Alarm: Red LED flashes to show the battery is alarming; solid on means the battery is under protection.
3.Running: Green LED light flashing to show the battery running status.
4.ADD switch (supports parallel and protocol selection): When battery strings are connected in parallel, the hardware DIP address of each PACK is unique. The hardware address is set by the DIP switch on the board. See the following table.
5.RS232
6.RS485A
7.RS485A/CAN
8.Reset:
 When the BMS is in hibernation state, press the button for 1S and release it. The protection board is activated, and the LED indicator lights
up successively for 0.5 seconds from the lowest power indicator.
When the BMS is in the working state, press the key for 3S-6S and release it. The protection board is put to sleep, and all LED indicators are on and off for 0.5 seconds successively from "RUN".  
When the BMS is in working state, press the button for more than 6S and release it. The protection board will be reset, and the LED
indicator will be displayed according to the current power.
9.Dry contact: Dry contact definition: (Normally open by default) ; 
When a protection or alarm is generated, dry contact 1acts; When there is protection, dry contact 2 action closed.
10.SW button ( Red In the middle )
11.Grounding
12.Power Terminals: there are two pair of terminals with same function, one connects to equipment, the other one paralleling to other battery module for capacity expanding. Uses water-proofed connectors for power cables. Keep pressing this Lock Button while pulling out the power plug.
13.BMS Basic Function

Protection and alarm	Management and monitor
Charge/Discharge End	Cells Balance
Charge Over Voltage	Intelligent Charge Model
Discharge Under Voltage	Charge/Discharge Current Limit
Charge/Discharge Over Current	Capacity Retention Calculate
High/Low Temperature(cell/BMS)	Administrator Monitor
Short Circuit	Operation Record
	Power Cable Reverse
	Soft start of inverter

 

Similar Product

 

Certifications

Packaging & Shipping

Company Profile

Founded in 2020, Jiangsu Huayou Energy Technology Co., Ltd. stands as a beacon of innovation in the high-tech landscape. This dynamic enterprise is a collaborative effort, initiated by Zhejiang Huayou Cycle Technology Co., LTD. (a subsidiary of the renowned Zhejiang Huayou Cobalt Co., LTD., Stock code: 603799), Toyota Tsusho (China) Co., LTD., China Merchants Group, and the influential China Electric Automobile 100 People's Association. Together, these industry giants fuel a journey toward excellence and transformative energy solutions.
Jiangsu Huayou Energy Technology Co., Ltd. is on a mission to revolutionize the dynamic power lithium battery sector. The company focuses on unlocking the potential of the entire lifecycle value chain of these batteries. By harnessing cutting-edge cloud platform battery data detection technology, pioneering core energy control systems, and spearheading innovative product creation, they are creating an unmatched energy big data network operation platform. Their vision is to emerge as a leading smart energy network solution provider, ensuring energy that is clean, safe, economical, and efficient! Step into a future of sustainable energy with Jiangsu Huayou.

 

FAQ

1. Can I have samples to test? And what is lead time?
Yes, we can supply samples, the lead time for samples is 7 days, and buyer pay for sample cost and shipping cost. Some are in stock and can be delivered at any time.

2. What kind of certificates do you have?
We can provide CE, ROHS, FCC, IEC62133, MSDS, UN38.3, ISO9001 etc.

3.Are you battery real capacity?
All of our battery cells with Grade A,100% new and real capacity. We promise 100% Top grade A. If you found it is not A battery cell, you can contact us for refund.

4.Can I print my LOGO on it?
YES, LOGO/sticker/OEM/ODM welcomed.

5.What is your after-sales service?
We provide 7*24h online support.

6. Payment details?
* Pay through T/T, Western Union, PayPal…
*Price term: FOB Shenzhen port, CFR, CIF.
*The customer is responsible for any tax or bank charges by their country.
*T/T 30% as deposit, T/T 70% before shipment, other payment terms can be discussed according to the order quantity.

7.Do you have MOQ ?
No limited. Small order also welcome.More quantity has better price, we will check the best price for you.